Calculadora: Libros en tapa dura

El sangrado hace referencia a las zonas de impresión que llegan al filo de las páginas y que posteriormente durante el corte se verán afectadas por el mismo. El tamaño neto del bloque interior es la medida final que quieres. El tamaño bruto es la medida antes de cortar, contando con el sangrado que posteriormente recortaremos.

El bloque interno sin sangrado se da cuando no hay impresión hasta el filo de las páginas.

La opción está diseñada para imprimir libros con muchos gráficos difíciles y para tiradas pequeñas y muy pequeñas. Apto para todo tipo de gráficos, especialmente deseable para trabajos difíciles, con muchas ilustraciones, grandes áreas de sólidos, etc. Impresión de alta densidad, muy negro, colores más oscuros que en impresión offset. Los bordes de la marca observada por el microscopio son muy nítidos. Es adecuado para imprimir en todos los papeles que usamos desde 70 gsm.

El trabajo contiene principalmente texto, gráficos y tablas. Las fotos individuales y pequeñas también son aceptables. La opción también se aplica a 2 + 2 trabajos impresos (desde la paleta CMYK). Cobertura total con colores de hasta 20% contados dentro del formato ordenado.

The window is cut into the cover after the block is cased in. Its preparation involves making a hole in the covering, base case and endpaper. The window may be located at the front or back of the book and may take a round or rectangular shape.

They can be cut at an angle or standard. In the first case, the cutting tool is angled at 45 degrees to the cover and in the second, at 90 degrees.

When designing, consider the tolerance of object matching between the covering and endpaper, which can be up to 2 mm. Avoid, for example, lines that would have their continuation on the part of the endpaper visible in the die-cut window.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Choose the binding board that becomes visible on the edges of the die-cut window – available types: standard (grey) and black (dyed).

We only cut out the window in board with a thickness of 2 mm.

Choose the binding board that becomes visible on the edges of the die-cut window – available types: standard (grey) and black (dyed).

We only cut out the window in board with a thickness of 2 mm.

The die-cut windows are made either at a standard or an angle.

In the first case, the cutting tool is angled at 90 degrees to the cover and in the second, at 45 degrees. The windows can take a round or rectangular shape.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Mark "None" if your project has no die-cut window on the front cover.

The die-cut windows are made either at a standard or an angle.

In the first case, the cutting tool is angled at 90 degrees to the cover and in the second, at 45 degrees. The windows can take a round or rectangular shape.

The safety limits are 25 mm from the edge of the base case at the spine side and 10 mm each for the other edges. Indicate the die-cut window's shape and location by preparing the mask as for the UV varnish.

Mark "None" if your project has no die-cut window on the back cover.

Block edge printing is done in CMYK with pigment inks.

Prepare the design in three PDF files per the rule: one PDF is one surface. Remember to include 3 mm bleeds and an offset tolerance of up to 1 mm between the cover and the printed edge.

Wrap graphics around the entire book, give an impressive position to the typography or extend the illustration from the cover. Edge printing is a fascinating and unconventional solution that thrills readers.